How can we help

Ask us, we will help you find a solution.

icon_widget_image Monday-Friday: opening hours 8:00 am to 4:00 pm icon_widget_image ul. Aleksandra 24/26/26G 93-418 Łódź icon_widget_image +48 (42) 611 00 26 +48 (42) 611 82 52 icon_widget_image kme@kme.eu export@kme.eu
Image Alt

Produkty

Niezawodność w komplecie

FENIX Injectors 4 CYL (TEE)

KME FENIX injectors are characterized by high gas flow stability. They are characterized by high quality of workmanship, which guarantees rigorous control of parameters during production and meticulous selection of materials used in it.

Quick info

Category: Tags: ,
Compare

Description

An unquestionable advantage of FENIX injectors is speed and short opening stable times. These injectors are also characterised by high stability of gas flow, and very presise fuel dosage in dynamic conditions. This is especially important for direct injection engines, due to their dynamic character. In order to provide a high quality injector, KME being a producer of complete autogas systems, implemented necessary parameter control system, and also secured the right selection of components.
The product contains seals made of rubber-based mixtures (FKM) and modern fluoropolymer sliding coatings (non-stick and anti-freeze) that make the injector extremelly resistant to fuel pollution and low temperatures. The injector is equipped with a standard Superseal 2-pin connector.
When mounting FENIX injectors, you can use either manifolds, or dedicated elbows, and knees. It is a very helpful tool for an installer, as they facillitate mounting the injector, even in difficult to access area.
The injector nozzles selection

Ø [mm]

1,0 [bar]

1,25 [bar]

1,5 [bar]

1,5
1,6
1,7

17÷23 HP | KM

19÷25 HP | KM

21÷28 HP | KM

1,8
1,9
2,0

24÷28 HP | KM

27÷32 HP | KM

31÷36 HP | KM

2,1
2,2
2,3

31÷35 HP | KM

35÷40 HP | KM

39÷45 HP | KM

2,4
2,5
2,6

37÷40 HP | KM

43÷46 HP | KM

48÷52 HP | KM

2,7
2,8
2,9
3,0

41÷45 HP | KM

47÷52 HP | KM

53÷59 HP | KM

The table shows the values of the injector nozzle diameter depending on the power output for one cylinder. Nozzle diameter selection values are approximate and suggested. In some cases they must be adjusted to the specific engine and system settings.
The way of reaming the injector nozzles

The way of mounting the injectors

 

JET gas ECU's PREPARED FOR YOUR NEEDS SUPPORT UP TO 8 CYLINDERS

Additional information

MAX. moc

MIN. czas stabilnego otwarcia

Rezystancja cewki

Opóźnienie otwarcia

MAX. prąd otwarcia

MAX. prąd podtrzymania

MAX. ciśnienie pracy

Temperatura pracy

Napięcie zasilania

Złącze

Wersje wykonania

Regulacja przepływy

Powłoka

You may also like…